Velodyne DD-15 Subwoofer VELODYNE.DD15
or from £74.42 /month
With their compact size and single front firing driver design, the Velodyne DD series subwoofers are easily hidden in a corner or built into a cabinet. Velodynes exclusive distortion limiting Dynamic Driver Control System assures linear cone movement, and controls the drivers frequency and distortion characteristics. This subwoofer manages to play loud yet keep the bass very clean, tight and accurate.
Product Specifiactions
Cabinet (H/W/D) (inc. feet)*:20" x 18" x 17.75"
Frequency Response:15 Hz to 120 Hz +/-3 dB
Harmonic Distortion:Less than 0.5% (typical)
High Pass Crossover:80 Hz at 6 dB/octave
Low Pass Crossover:15 Hz to 199 Hz (variable in 1 Hz increments) 6/12/18/24/30/36/42/48 dB per octave slope (variable) Default: 80 Hz @ 24 dB/octave
Subsonic Filter:15 Hz to 35 Hz (variable in 1 Hz increments) 6/12/18/24/30/36/42/48 dB per octave slope (variable) Default: 15 Hz @ 24 dB/octave
Phase:0 to 180 degrees (variable in 15 degree increments)
Polarity:Adjustable (+/-)
Amplifier (Class D):1250 watts RMS(3000 Peak)
Woofer (Forward Firing):15" (12.7" piston diameter)
Magnet Structure:380 ounces (24 lbs)
Voice Coil:Tandem 3-inch push-pull
LFE (Mono):Line Level (RCA), Balanced (XLR)
Input (L&R):Line Level (RCA)
Microphone:Balanced (XLR, cable included)
Speaker Level (L&R):Bare wire, banana plugs, or spade lugs.
Thru (L&R):Line Level (RCA)
Output (L&R):Line Level (RCA)
EQ Output:Line Level (RCA) for Test Signal L/R and Video (cables included)
Shown here in maple, also available in gloss black and cherry
See all Velodyne Subwoofers
