Epos M Subwoofer EPOS.MSUB
or from £17.25 /month
The M Sub has a powerful loudspeaker driver fitted to the bottom of the cabinet, with 2" voice coil and large magnet size to handle very high power levels for long periods without distress. Its paper cone diaphragm is very stiff to keep distortion and colouration to a minimum. The rubber suspension surround is smaller than normal and quite stiff, which also helps to reduce distortion and low frequency over-hang. In short it has been designed to enable the M Sub to integrate perfectly with a two-channel system that requires additional bass extension. However, it is also well suited to the needs of a 5.1 system and can provide exceptional bass extension for movies.
To further boost the fidelity the M Sub has a very stiff cabinet with extensive internal bracing and thick walls, which is rarely found in conventional subwoofers. It has a completely sealed section at the back of the cabinet to house its high powered 300 Watt amplifier. This technique is more normally found in professional speakers.
To further improve the sound quality Epos does not use port tuning to achieve increased bass extension. This helps to avoid air turbulence noises from interfering with the fidelity of the loudspeaker. It also avoids the usual peak in bass at one frequency that usually characterizes the sound of inferior 5.1 type subwoofers.
With a cosmetic design similar to the M series range of speakers, the M Sub is available in the three finishes - light cherry, dark cherry and black ash.
The M Sub is designed to be a down firing speaker, with fixed height legs to stand on. These can be used on their own or with the matching wooden plinth that protects the driver and allows the driver to breath properly. 6mm carpet spikes or soft foam pads can be fixed to the bottom of the plinth, depending on the floor surface or personal preference.
Product Specifications
- Power Handling: 300W
- Frequency Response: 20Hz to 150Hz with high and low filter
- Impedance: 4 ohms
- Sensitivity: 89dB per W
- Amp Compatibility: Built-in
- Configuration: 10" Bass Driver
- Dimensions HxWxD (mm): 372 x 342 x 450
- Weight: 26kg
- Available in Cherry, Red Cherry or Black Oak
- Finish: Real Wood Veneer
See all HiFiBitZ Subwoofers
